GPS约束下陇西地区断裂带现今滑动速率的非连续接触模拟研究     

孟庆筱  景鹏旭  何申海  党学会 《大地测量与地球动力学》2018,38(12):1227-1231

以中国地壳运动观测网络1999、2001、2004和2007年4期GPS观测数据为边界条件，使用非连续接触有限元技术构建陇西块体二维有限元模型，在摩擦系数不确定性分析基础上，计算区内主要断裂带滑动速率。结果表明，现今地壳形变运动状态下陇西块体的北东向运动在海原断裂附近受到鄂尔多斯块体、阿拉善块体阻碍，陇西块体周缘的海原断裂带、老虎山断裂、西秦岭北缘断裂呈现左旋走滑特征，滑动速率为3.5 mm/a、2.2 mm/a和1.9 mm/a，说明在青藏高原推挤作用下以上关键部位正在进行快速的构造应变积累。  相似文献   

甘肃省席芨水地区遥感蚀变信息提取及找矿远景分析          下载免费PDF全文

周永刚 《山东国土资源》2018,34(8)

在地质工作程度较低、基岩出露较好的地区,充分重视遥感数据的使用,可有效地缩小工作靶区,提高找矿效率。该文以甘肃省席芨水地区为研究区,基于ETM+遥感数据,利用多元数据分析、准归一化、掩膜分析、主成分分析、密度分割等方法,从Landsat7ETM+数据中提取金矿化蚀变信息。在遥感地质解译的基础上,充分分析提取的羟基异常和铁染异常,结合区域地质特征、区域成控矿条件及区域物化探异常特征等,尽可能去掉假、弱异常。结果表明:该方法能有效消除植被、水系、阴影等干扰信息的影响,从遥感数据载体中提取微弱的金矿化蚀变信息。提取的矿化蚀变信息与断裂构造具有较好的相关性,主要分布于断裂构造交会处、断裂与岩体交会处等成矿优势部位,对今后的找矿工作具有一定的指导意义。  相似文献   

基于ROMS和4DVAR的沿轨与网格化SSH数据同化效果评价   总被引：1，自引：1，他引：0  

周超杰  丁效华  张杰  杨俊刚  马强 《海洋学报(英文版)》2018,37(9):50-58

Remote sensing products are significant in the data assimilation of an ocean model. Considering the resolution and space coverage of different remote sensing data, two types of sea surface height(SSH) product are employed in the assimilation, including the gridded products from AVISO and the original along-track observations used in the generation. To explore their impact on the assimilation results, an experiment focus on the South China Sea(SCS) is conducted based on the Regional Ocean Modeling System(ROMS) and the four-dimensional variational data assimilation(4 DVAR) technology. The comparison with EN4 data set and Argo profile indicates that, the along-track SSH assimilation result presents to be more accurate than the gridded SSH assimilation, because some noises may have been introduced in the merging process. Moreover, the mesoscale eddy detection capability of the assimilation results is analyzed by a vector geometry–based algorithm. It is verified that, the assimilation of the gridded SSH shows superiority in describing the eddy's characteristics, since the complete structure of the ocean surface has been reconstructed by the original data merging.  相似文献   

莱州湾表层沉积物粒度和黏土矿物分布特征与运移趋势分析     

冯利  冯秀丽  宋湦  肖晓  田动会 《海洋科学》2018,42(2):1-9

运用粒度参数分析、黏土矿物含量分析、Flemming三角图示法和Gao-Collins二维的"粒度趋势分析"等方法,对采自莱州湾海域的表层沉积物样品和黏土矿物样品进行分析,了解了该研究区域的沉积环境及沉积物的运移趋势。研究区由岸向海沉积物类型大致依次为砂-粉砂质砂-砂质粉砂-粉砂-黏土质粉砂,并且研究区表层沉积物在近岸区域呈现较为明显的平行岸线的条带状特征;同时沉积物的平均粒径、分选系数、偏态、峰态等粒度参数也呈现出良好的正相关性或负相关性;研究区黏土矿物为伊利石、蒙脱石、绿泥石、高岭石,除伊利石分布大致为黄河三角洲近岸低,向研究区东北方向逐渐升高外,其余的黏土矿物都表现出了近岸高,远海低的分布特征,且主要物源为黄河物质输入。Flemming三角图研究区所有采样点大部分分布在Ⅱ区,少部分分布在Ⅲ区,说明研究区整体水动力较强;采样点在A—E区均有分布,但在C、D两区分布最多,说明研究区沉积物粒径较集中。研究区表层沉积物整体呈由岸向海输运的趋势,具体来看,黄河沉积物入海后向北、向东、向南运移,研究区内沉积物的来源是黄河输沙以及周围入海的小河流的输沙和沿岸冲刷的物质。  相似文献   

参数带椭球约束平差算法的应用     

肖兆兵  宋迎春  谢雪梅 《大地测量与地球动力学》2018,38(9):964-967

针对实际工程应用中遇到的参数带有范围约束的情形，提出带椭球约束的平差算法，并给出其具体模型和解算步骤。数值模拟实验和病态测边网数据计算表明，在处理病态问题时，最小二乘平差（least-squares，LS）已不适用，而与岭估计、奇异值分解法（singular value decomposition，SVD）以及不等式约束相比，本文算法精度更高。  相似文献   

新疆库车县盐水沟北铜矿床地质特征及成因探讨          下载免费PDF全文

刘传朋 《山东国土资源》2018,34(4)

盐水沟北铜矿区位于新疆库车县北部,其大地构造位置处于塔吉克-塔里木陆块区、塔里木陆块、塔里木北缘隆起、库车前陆盆地,区内构造活动强烈。铜矿床赋存于新近纪中新统康村组第一岩性段,矿体呈层状,严格受地层控制。区内共圈定10个铜矿体,矿石矿物主要为孔雀石、赤铜矿、水胆矾、自然铜等,矿体内无夹石,顶、底板围岩均为褐红色及浅红色粉质泥岩。该矿床为砂岩型铜矿床。  相似文献   

Assessment of alternative adsorption models and global sensitivity analysis to characterize hexavalent chromium loss from soil to surface runoff          下载免费PDF全文

Chuan‐An Xia  Juxiu Tong  Bill X. Hu  Xiujie Wu  Alberto Guadagnini 《水文研究》2018,32(20):3140-3157

We investigate our ability to assess transfer of hexavalent chromium, Cr(VI), from the soil to surface runoff by considering the effect of coupling diverse adsorption models with a two‐layer solute transfer model. Our analyses are grounded on a set of two experiments associated with soils characterized by diverse particle size distributions. Our study is motivated by the observation that Cr(VI) is receiving much attention for the assessment of environmental risks due to its high solubility, mobility, and toxicological significance. Adsorption of Cr(VI) is considered to be at equilibrium in the mixing layer under our experimental conditions. Four adsorption models, that is, the Langmuir, Freundlich, Temkin, and linear models, constitute our set of alternative (competing) mathematical formulations. Experimental results reveal that the soil samples characterized by the finest grain sizes are associated with the highest release of Cr(VI) to runoff. We compare the relative abilities of the four models to interpret experimental results through maximum likelihood model calibration and four model identification criteria (i.e., the Akaike information criteria [AIC and AIC_C] and the Bayesian and Kashyap information criteria). Our study results enable us to rank the tested models on the basis of a set of posterior weights assigned to each of them. A classical variance‐based global sensitivity analysis is then performed to assess the relative importance of the uncertain parameters associated with each of the models considered, within subregions of the parameter space. In this context, the modelling strategy resulting from coupling the Langmuir isotherm with a two‐layer solute transfer model is then evaluated as the most skilful for the overall interpretation of both sets of experiments. Our results document that (a) the depth of the mixing layer is the most influential factor for all models tested, with the exception of the Freundlich isotherm, and (b) the total sensitivity of the adsorption parameters varies in time, with a trend to increase as time progresses for all of the models. These results suggest that adsorption has a significant effect on the uncertainty associated with the release of Cr(VI) from the soil to the surface runoff component.  相似文献   

基于平均分组和叠加相关的GPS信号捕获方法     

杨久东  吴风华  王文军 《大地测量与地球动力学》2018,38(8):828-831

针对目前GPS软件接收机C/A码捕获信噪比门限高、捕获速度慢的问题，提出一种基于平均分组和叠加相关的GPS弱信号捕获方法。首先，基于平均相关处理技术降低C/A码捕获过程中的自相关损耗，提高对微弱信号的捕获能力；然后，利用叠加相关提高相干运算的运算效率，并采用线性插值提高自相关函数性能；最后，利用频偏校正和内插进一步提高C/A信号的捕获精度。理论分析和仿真实验均验证，该方法能够在较低的信噪比下实现GPS信号捕获，且精度较高、运算量较低。  相似文献   

Influence of seismic motions on behavior of piles in liquefied soils          下载免费PDF全文

Kaustav Chatterjee  Deepankar Choudhury 《国际地质力学数值与分析法杂志》2018,42(3):516-541

In the present study an analytical procedure based on finite element technique is proposed to investigate the influence of vertical load on deflection and bending moment of a laterally loaded pile embedded in liquefiable soil, subjected to permanent ground displacement. The degradation of subgrade modulus due to soil liquefaction and effect of nonlinearity are also considered. A free headed vertical concrete elastic nonyielding pile with a floating tip subjected to vertical compressive loading, lateral load, and permanent ground displacement due to earthquake motions, in liquefiable soil underlain by nonliquefiable stratum, is considered. The input seismic motions, having varying range of ground motion parameters, considered here include 1989 Loma Gilroy, 1995 Kobe, 2001 Bhuj, and 2011 Sikkim motions. It is calculated that maximum bending moment occurred at the interface of liquefiable and nonliquefiable soil layers and when thickness of liquefiable soil layer is around 60% of total pile length. Maximum bending moment of 1210 kNm and pile head deflection of 110 cm is observed because of 1995 Kobe motion, while 2001 Bhuj and 2011 Sikkim motions amplify the pile head deflection by 14.2 and 14.4 times and bending moment approximately by 4 times, when compared to nonliquefiable soil. Further, the presence of inertial load at the pile head increases bending moment and deflection by approximately 52% when subjected to 1995 Kobe motion. Thus, it is necessary to have a proper assessment of both kinematic and inertial interactions due to free field seismic motions and vertical loads for evaluating pile response in liquefiable soil.  相似文献   

Numerical evaluation of soft inter‐slab joint in concrete‐faced rockfill dam with dual mortar finite element method          下载免费PDF全文

Mozhen Zhou  Bingyin Zhang  Chong Peng 《国际地质力学数值与分析法杂志》2018,42(5):781-805

Recently constructed concrete‐faced rockfill dams (CFRDs) often use soft inter‐slab joints to prevent axial compression‐induced extrusion damage in the concrete face. Due to the complexity of the multibody contact and the lack of information on the actual behavior of soft joints, it is highly challenging to numerically assess the effect of soft joints in CFRDs. In this paper, we present a numerical approach for the three‐dimensional modeling of CFRDs with hard and soft joints. A dual mortar finite element method with Lagrange multiplier is developed to treat the multibody contact in hard joints with impenetrability condition. The soft joint slab‐filler‐slab contact system is modeled using an equivalent contact interface approach, where the soft contact constraints are imposed using a perturbed Lagrange formulation. Through a series of laboratory tests, the mechanical behavior of soft joint is investigated. An extrusion model for the soft joint is presented and implemented in the dual mortar finite element method. The proposed numerical method is applied to the three‐dimensional analysis of Tianshengqiao‐1 CFRD. Despite the complex multibody contact and strong material and geometry nonlinearities in the CFRD, the proposed method is stable and capable of capturing salient characteristics of the CFRD. Numerical results show that in Tianshengqiao‐1, the employment of soft joints can effectively reduce the axial compression stress, thus greatly alleviating the risk of extrusion damage in the concrete face.  相似文献